Tanks and Vessels

 

Stock Number:

Capacity (ltrs):

Orientation:

Material:

Manufacturer:

Model:

Inlet/Oulet:

Description:

CB3605

50

Vertical

Stainless Steel

Insulated Mixer




CB3605 50 Litres, 11 Galls Stainless Steel Vessel 316L, ASME VIII DIV 1. Insulated With 40mm Phenolic Foam c/w Vapour Barrier. Cladding 2.5/2.0 S/Steel 304. ( 81 L To T/L, 93 L Total) Fittings: 1x 6" Flange ANSI 150 - Agitator 1x 1" Weld-In Special - IngoldSample Point (Incomplete) 1x 2" Triclover - Nozzle Spray Ball 1x ¾" Weld-In Special Thermopocket 1x 1½" Triclover - Liquid Inlet & Dip Pipe 1x 1½" BSP Socket - PH Probe (Incomplete) 1x 2" Weld-In Special - Level Probe (Incomplete) 1x 1" Triclover - Vent 1x 2" Triclover - Conductivity Probe (Incomplete) 1x 4" Triclover - Sight Glass 1x 2" Triclover - Outlet Valve 1x 1" Triclover - Bursting Disc (Incomplete) Internal Welds Ground Smooth Internal Surface Polished To Finish of 0.39 - 0.51 Ra. External Surface Polished To Finish of 0.51 - 0.64 Ra. Fabricated Weight 130 kgs, Weight Full of Water 223 kgs. "Lightnin" Mixer Model HS 25 NX Motor, BCPM, Inverter Rated, 0.01-0.25 Kw, 140-170 RPM, 2A, 3 PH, 380v @ 50Hz. NOTE: - Although these vessels are designed as pressure vessels they were run under atmospheric conditions and the mixer units are not fitted with high pressure seals. Operating Pressure Atmos Design Pressure 7.0/4.2 BARG, 0 BARA Test Pressure 10.5 BARG Design Temp 95/155/0°C Operating Temp +2 TO +80°C

 
CB3605scan.jpg">Click here to view technical drawings

 

Capacity:
50

Qty
  Each
 

 
Next
 

Industry Standards

Whether a vessel is required for the brewing, soft drinks, chemical or food industries, strict requirements must be met. Following the introduction of the Pressure Equipment Directive (PED) suppliers cannot simply cut and weld a vessel without considering its original design and the intended use of the modified vessel. Add to this the requirements of BS5500, ASME VIII, and the ATEX Directive (which deals with hazardous environments) and it soon becomes clear that tank modification has to be approached in a professional and dedicated manner. To meet these requirements, we carry out all work in full accordance with both our documented Quality Assurance system and to manufacturing drawings produced by our experienced in house design team.