Tanks and Vessels

 

Stock Number:

Capacity (ltrs):

Orientation:

Material:

Manufacturer:

Model:

Inlet/Oulet:

Description:

CB3604

50

Vertical

Stainless Steel

Insulated Jacketed




CB3604 50 Litres, 11 Galls Stainless Steel Jacketed Vessel 316L, ASME VIII DIV 1. Insulated With 40mm Phenolic Foam c/w Vapour Barrier. Cladding 2.5/2.0 S/Steel 304. ( 81 L To T/L, 93 L Total) Fittings: 1 x 8" Flange ANSI 150 - Handhole 1x 1" Weld-In Special - Ingold Sample Point (Incomplete) 1: 2" Triclover - CIP Spray Ball 1x ¾" Weld-In Special - Thermopocket 1x 1" Triclover - Liquid Inlet & Dip Pipe 1x 2" Triclover - Outlet Valve 1x 1" Triclover - Vent 1x 2" Weld In Special - Level Probe (Incomplete) 1x 4" Triclover - Sight Glass 1x ½" ANSI 150 - Jacket In 1x: ½" ANSI 150 - Jacket Out Internal Welds Ground Smooth Internal Surface Polished To Finish of 0.39 - 0.51 Ra. External Surface Polished To Finish of 0.51 - 0.64 Ra. Fabricated Weight 148 kgs, Weight Full of Water 241 kgs. Vessel Jacket Operating Pressure Atmos 3.0 BARG Design Pressure 7.0/4.2 BARG, 0 BARA 5.5 BARG/0.8 BARA Test Pressure 10.5 BARG 8.25 BARG Design Temp 95/155/0°C 155/-6°C Operating Temp +2 TO +80°C 2°C

 
CB3604scan.jpg">Click here to view technical drawings

 

Capacity:
50

Qty
  Each
 

 
Next
 

Industry Standards

Whether a vessel is required for the brewing, soft drinks, chemical or food industries, strict requirements must be met. Following the introduction of the Pressure Equipment Directive (PED) suppliers cannot simply cut and weld a vessel without considering its original design and the intended use of the modified vessel. Add to this the requirements of BS5500, ASME VIII, and the ATEX Directive (which deals with hazardous environments) and it soon becomes clear that tank modification has to be approached in a professional and dedicated manner. To meet these requirements, we carry out all work in full accordance with both our documented Quality Assurance system and to manufacturing drawings produced by our experienced in house design team.